BlackPanther Posted January 20, 2011 Share Posted January 20, 2011 Alright I may be the biggest newb, but I've been tryin to find a way to route stuff like my drums into one channel for further processing. When I route my drums and stuff to a channel, there is that extra volume from what I'm assuming is from the channel I routed all my instruments into. How would I go about doing the whole routing thing without changing the volume on the instruments? Edit: Now that I think about it, this coulda been posted in the FL thread my apologies. Quote Link to comment Share on other sites More sharing options...
eilios Posted January 20, 2011 Share Posted January 20, 2011 Are you using the mixer's "route only to this channel" function? If not, that's usually a good way to go. Right click the channel you want to route to to see it. Quote Link to comment Share on other sites More sharing options...
Clem Posted January 20, 2011 Share Posted January 20, 2011 Eilios is right. Alternatively, you can always disable the output of any given channel to the master track by clicking the little button directly above the "FX" button on the master track. Just make sure that you have the track you wish to re-route selected when you do it. Doing this will make sure there is only one drum audio stream being sent to the master track rather than the two that you are probably dealing with now. Quote Link to comment Share on other sites More sharing options...
BlackPanther Posted January 20, 2011 Author Share Posted January 20, 2011 Oh crap. Good call, thanks guys =D. Edit: So yeah problem solved, thanks again guys for helpin out this slow nub =). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.