same midi problem fix doesnt work (newbie!)

[eddie21leeds]

hi there this is my first post so be kind!!

i too am having dificulty with midi sound... ive tried the LSD port fix but this hasnt worked... is there anything else i need to check???

thanks for reading!!

[Zephyr]

Just for the record, it isn't a "fix", as it is in no way broken. Okay, so I'm assuming that you imported a midi file. Are the channels "Midi Out" channels? (can you read the words Midi out anywhere when you click on the big button with words on it?) If you can, then you need to take note of what the Port LCD says (the box to the right of the word port). Now go to the MASTER channel in the MIXER and click on the drop-down arrow in the first FX slot. Choose "Fruity LSD", now make sure that the little green light next to the words "Fruity LSD" in the FX chain is lit up. Now make sure that the green light below the colored gauge on the master channel on the mixer is lit up, underneath that near the bottom, (just above the disk icon) it should say FX. Make sure that it's lit up.

Now go back to the LSD panel, change the Port LCD to read the same as the one in the midi out. If that still doesn't work, you can try changing the "Deuce" to microsoft synthesizer, BUT DON'T UNLESS YOU HAVE TO. There's also a volume knob on the LSD interface which can be adjusted.

Try this stuff out, try it from a new project, the bolded stuff is the most important.