Jump to content

Durable, high-capacity hard drive, and questions thereof


The Pezman
 Share

Recommended Posts

I have a 750 GB external hard drive, but I have a problem: it's not well suited to being carried around a lot (which, since I don't live in one place for too long, is what I frequently do). I accidentally dropped it and, though it turns on, it's not doing so well. I would like an external hard drive of at least that capacity which is built to withstand travels and slight bumps (to a reasonable extent, of course. Not like I'll be pitching it across a field). Kind of like this thing, except with a 750 capacity (and hopefully a cheaper price). Are there enclosures built like this? If so, that means I can buy one and a 1 TB internal hard drive for not that much money.

Link to comment
Share on other sites

You might want to look into getting a rugged enclosure like that one and fill it with a higher capacity laptop drive, since they were designed with more rugged use in mind. This is far from the cheap option however.

Link to comment
Share on other sites

  • 3 weeks later...

I'm not too sure if this is what you want. Have you checked the dimensions? It's like a thick paperback book. My friend has a WD My Passport. It's very small, similar to that of DS. Storage is obviously limited and doesn't have a fan to cool it down, but I don't think you have to worry about unless you have it on for extended periods of time. It only requires the USB plug too. Very convenient, but also pricey.

Link to comment
Share on other sites

The MyBook is a good external enclosure, it's usually got a fan and is pretty high quality. It is a bitch to take apart though, and usually the case breaks when you do XD

A 750GB or large capacity hard drive is likely to have perpendicular recording. This means that you are rewarded with higher capacity on a more dense (read: delicately aligned) platter. They're fantastic for stay-put machines. Not so much for externals to be honest.

LaCie makes a "Rugged" external case but they're not the best brand - they tend to use the drives provided by the lowest bidder (usually ibm/hitachi) and some even have refurbished drives in them. The Buffalo drive linked above looks good, however stick to using their USB products since their network attached products all use a variant of the Linux Reiser file system which can be a bitch to recover from if anything fails or the file system gets corrupted. Scandisk won't know wtf to do with it.

You have a couple options, either you can switch to a lower capacity drive like a 250 (a lot are still normal recording and not perpendicular), you can buy a "rugged" external enclosure or you can switch to flash memory and throw it around all you want.

Or, you could just be realllly careful with your higher capacity delicate drives :<

Link to comment
Share on other sites

  • 2 weeks later...
The MyBook is a good external enclosure, it's usually got a fan and is pretty high quality. It is a bitch to take apart though, and usually the case breaks when you do XD

If I were to get the MyBook (or, for that matter, any external hard drive already built) I wouldn't want to take it apart. I'd just want it to work. Kind of like my current hard drive.

A 750GB or large capacity hard drive is likely to have perpendicular recording. This means that you are rewarded with higher capacity on a more dense (read: delicately aligned) platter. They're fantastic for stay-put machines. Not so much for externals to be honest.

Do you mean to say that they tend to not function in external enclosures, or that external enclosures aren't built to house those kind of drives? I checked some out on Newegg and they don't indicate what kinds of drives they can or can't handle.

LaCie makes a "Rugged" external case but they're not the best brand - they tend to use the drives provided by the lowest bidder (usually ibm/hitachi) and some even have refurbished drives in them. The Buffalo drive linked above looks good, however stick to using their USB products since their network attached products all use a variant of the Linux Reiser file system which can be a bitch to recover from if anything fails or the file system gets corrupted. Scandisk won't know wtf to do with it.

Yeah, I had a Lacie drive before and wasn't happy with it. I hope to not have to get another.

You have a couple options, either you can switch to a lower capacity drive like a 250 (a lot are still normal recording and not perpendicular), you can buy a "rugged" external enclosure or you can switch to flash memory and throw it around all you want.

The rugged external sounds like the best option, since a large amount of space is important to me, nor do I think Flash memory will reach that capacity for a while yet.

Or, you could just be realllly careful with your higher capacity delicate drives :<

I actually had the drive for a couple of years before I had any problems. I just need to have something which has a bit of clumsiness forgiveness.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

This is weird. Tried to click on your link and NewEgg told me it was having server problems. But I looked on the rest of NewEgg and server problems apparently just mean they can't find the damn page. Can you relink or just tell me what you found? Thanks.

Link to comment
Share on other sites

Hm, weird. Try this.

Basically Iomega has a line of externals by the name of "eGo" that apparently feature some sort of "DropGuard" technology. Although on second glance, the biggest one they have is 320GB for $200 (pricey to say the least). They have desktop models that hold 1TB and are more reasonably-priced, but don't promise the same DropGuard technology.

Looks like if you don't want to shell out the scrilla, your best option is to look for a rugged enclosure, assuming they exist.

Link to comment
Share on other sites

Okay, I think I've settled on what I'll get. I realized that I wanted the ability for Firewire 800 (since I'm getting a Mac alongside this and will want to make use of the speed boost). This is the cheapest of the 1 TB hard drives, and its specs seem to stand up against the others (SATA, 7200 RPM, etc). This guy appears to be the cheapest compatible enclosure with 800 ports. Together, they'll run me $280, which is a bit more than the myBook I was looking at, but not as fast (why they think including eSATA over FW800 is a good idea is beyond me). It's also not as wieldy as the myBook, but it's definitely more wieldy than my current hard drive (which they've apparently stopped making).

I don't intend to be dropping the drive, but in case I do perhaps it's possible to pad the hard drive within its chassis to reduce the risk of any sudden jolts.

Too bad I can't wait til the next generation of USB/Firewire, though...

EDIT: Damn, just found this one, which is cheaper but probably even more unwieldy.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...