Jump to content

MAGFest X! PMD Time :(


Liontamer
 Share

Recommended Posts

As promised...

384883_10150526728854253_757869252_8659936_324219015_n.jpg

First, I make-a the design-a.

376015_10150526729829253_757869252_8659938_197084477_n.jpg

Then, I get a transparency printed at FedEx Kinkos (thanks to Fusion2004 I have lost the game)

385501_10150526730919253_757869252_8659939_1631685801_n.jpg

Next, photo emulsion is poured to prepare the screen.

398527_10150526732159253_757869252_8659941_997507571_n.jpg

The screen is covered and placed into the Yudu fan compartment to dry in the dark. Any light hitting it at this point will cause it to cook the emulsion, so this must be done in the dark.

386520_10150526733259253_757869252_8659944_18175896_n.jpg

Next, the transparency is placed under the screen and flooded with light. The emulsion is exposed for a time. after this point I remove the screen and wash it, only the covered letters and design wash off leaving the screen as a stencil ready to be used for screenprinting.

394478_10150526735339253_757869252_8659948_277564277_n.jpg

The finished screen is now flooded with paint and pressed down against a shirt.

387718_10150526736459253_757869252_8659952_778850753_n.jpg

After pressing the paint through, a shirt is completed.

397001_10150526737409253_757869252_8659954_709978007_n.jpg

Many completed shirts!

Send me a PM with shirt color/ink color preferences. I can do up to XL for $15 no shipping in the US, larger will be more as I'll have to order or find a good vendor.

Each screen is not cheap and takes time to create, working full time I'm not doing custom shirt design requests at this time, especially not for a single shirt.

Link to comment
Share on other sites

Don't have permission to view :(

Add me on Facebook, obviously!

but you always get drunk...at least until you have to talk in front of ocr.

I had no choice at that point! I had to be drunk for the panel! hahaha

I expect everyone here to fill this out and mention that Jamspace once again needs a dedicated section next year that won't be off-limits during concerts.

YES! I WANT THIS TO HAPPEN. Not everyone sees the concerts. I also noticed MAG X's Jamspace wasn't as special as the previous years. Hope it improves, but it starts sharing our opinions.

Link to comment
Share on other sites

My only real gripe was that the main stage was almost at ground level. You couldn't see a darn thing. Stages should be AT LEAST near shoulder-level with people standing on the ground. That's why they hire security to stand in front of a barricade in front of the stage and catch crowd surfers -- obviously less of an issue with MAG, and probably not needed, but the extra stage HEIGHT is a definite MUST just so people will be able to see the band. Major gripe. *salutes*

Link to comment
Share on other sites

My only real gripe was that the main stage was almost at ground level. You couldn't see a darn thing. Stages should be AT LEAST near shoulder-level with people standing on the ground. That's why they hire security to stand in front of a barricade in front of the stage and catch crowd surfers -- obviously less of an issue with MAG, and probably not needed, but the extra stage HEIGHT is a definite MUST just so people will be able to see the band. Major gripe. *salutes*

According to the closing ceremonies, they are moving the main stage to the Potomac Ballroom next year, which has a HUGE built-in stage and is about 20,000 sq. ft. larger than the room the concerts were in this year, so that should take care of the problem for most of the shows.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...